Recommended by
manu- facturers of digital cameras, scanners and other devices
with critical cleaning requirements. This product meets or exceeds
SEMI standards. Not for use with Dye-On CCD chip. |
|
Safe
for use on monochrome CCD's, scanners, optical mirrors and other
sensitive electronic and photographic image-forming surfaces
when used as directed. e-wipe combines an ultra pure lint-free
wipe and a precise pre-measured amount of an ultra-pure, highly
refined alcohol mixture.
This convenient packaging prevents
over useage and contamination which can destroy an expensive
component. As originally sealed, this packet contains not more
than 5 parts per million of contaminants and when used, will
dry instantly leaving absolutely no residue! To use, tear open
a packet at notch and remove wipe. With a gentle flick of the
wrist, the pad will unfold. This should be done with one hand
to minimize handling. Lightly wipe across the surface to be
cleaned in a single direction only. Do not go over a previously
cleaned area with the same wipe, or re-use a wipe at any time,
as the dirt collected can cause severe damage.
Used
and recommended by Leaf Systems.
"Leaf Systems promotes the use of the new e-wipe from Photographic
Solutions on our digital cameras. This one-step procedure is
the easiest and safest way to keep the CCD clean."
|
